drypro Air Dryers

DRY-PRO ™ by MOD-U-BLAST® Single Tower, Deliquescent, Air Dryers are a skid mounted system which includes an aftercooler, a coalescing filter and a single tower dryer filled with desiccant tablets. Warm air enters the aftercooler where it is cooled close to the surrounding temperature, water is then condensed out during this cooling process. The saturated air and the liquid water pass through a coalescing filter where any oil contaminants from the compressor are removed and then proceeds to the inlet of the dryer tank. The water and any solid particles present are separated by gravity and fall to the bottom of the dryer tank. The air moves up through the desiccant tablets which absorb the moisture from the air before it flows through the dryer outlet. The tablets dissolve gradually as they absorb the moisture. The dissolved desiccant and water, falls into the bottom of the vessel. The dryer must be drained periodically to remove the accumulated solution. A manual ball valve is installed for this purpose.

Features:

• Polyarmor G17 lined deli-vessel

• Initial desiccant fill

• Industrial, air motor driver aftercooler assembly

• Coalescing filters

• FRL package 

• Sight glass

• Temperature gauge 

• Pressure relief valve

• Rugged heavy duty construction and powder coated frame

• Full load lifting eyes & fork pockets for easy transport

• Operates in sub zero temperatures 

• Manual holder 

• CRN Registered Vessel, U Stamped, National Board certified, ABSA Certified (Alberta) -

  1000, 1200 & 1600 CFM 

Available in 5 models: 250, 450, 750, 1000, and 1600 CFM